The Quick Look And Engineering Level Testing For FCC Part 15, mIL-STD-461, DO-160, FCC Part 15 and ENxxx. Localized E and H field Probing
Tests use calibrated test equipment in either a well damped anechoic chamber or open field test site (OATS). The test facility has been inspected by the Canadian Space Agency and found well qualified to perform EMC/EMI testing.
localized E and H field probing
Small E and H field probes and a current probe are used to isolate the sources of emissions A 3.18mm diameter probe used from 20-1000MHz is sensitive enough to measure localized fields and is invaluable for measuring PCB emissions down to a single trace or an IC pin.
Antenna calibration on the OATS